Maintenance & Service Guide
Presario 1800 Series
Models: 1825 and 1800T
Home Page Notice Preface Product Description Troubleshooting Illustrated Parts Catalog Removal & Replacement Procedures Specifications Pin Assignments Battery Pack Operations
Service Considerations
Listed below are some of the considerations that you should keep in mind during the disassembly and assembly of the computer.
Tool and Software Requirements
To service the computer, you need the following:
●Torx
●5mm nut drivers (for screwlocks and standoffs)
●Small standard screwdriver
●Small Phillips screwdriver
●Diagnostics software
Screws
The screws used in the computer are not interchangeable. If an incorrect screw is used during the reassembly process, it can damage the unit. Compaq strongly recommends that all screws removed during disassembly be kept with the part that was removed, then returned to their proper locations.
IMPORTANT: As each subassembly is removed from the computer, it should be placed away from the work area to prevent damage.
