Ô NOTE Ô
•You must reset the ID channel each time you change the batteries. Your wireless keyboard and optical mouse channel automatically select one of the 256 ID codes after you press both channel buttons.
•When you open the keyboard HotKey setting menu, 
appears on the task bar and disappears when the HotKey setting menu is closed.
•The left button is a default click button and you do not need to set it.
•If you are using Windows XP or Windows 2000, you must reinstall the software if:
The eyes on the mouse icon ( ) in the task bar do not move or the eyes are closed.
The receiver was originally installed on the PS/2 and you later switch to a USB port.
You install the receiver on one USB port and later move it to a different USB port.
2.Press the channel button on the bottom of the wireless mouse. The top green LED indicator on the receiver flashes.
3.Press the channel button on the bottom of the wireless keyboard. The top green LED on the receiver flashes.
4.Wait until the green LED on the receiver goes off. Then move the wireless mouse and press any key on the wireless keyboard. If the green LED flashes, the channel connection among the receiver, wireless mouse and keyboard is successfully set. If the green
LED indicator does not flash, channel connection fails and you must repeat Steps
SOFTWARE INSTALLATION
To perform the various customized functions for operation with the Internet and Windows, follow these steps to install the supplied driver CD. Ô
1.Turn on your computer and start Windows.
2.Insert the supplied driver CD into your
3.If your computer is AutoRun compatible, wait for the setup screen to display, then go to step 4.
If your computer is not AutoRun compatible, click Start on the Windows task bar, then Run. Type d:\SETUP.EXE and click OK, if <d:> is the drive designation of your
4.Follow the on screen instructions to install the driver then restart your computer.
WIRELESS MOUSE AND KEYBOARD SETTING MENU
The wireless mouse’s and keyboard’s setting menu in the supplied driver software enables you to set the wireless mouse or keyboard buttons to your preference. You can change the pointer type, mouse speed, cursor size, pointing
direction, and so on. 
at the lower right of the Windows task bar to open the respective button control panel.Ô
10
