SOYO P4X400 specifications Cooling Fan Installation CPU Cooling Fan CPUFAN1, CPUFAN2

Hardware Installation SY-P4X400 DRAGON Ultra

3.Cooling Fan Installation

(1) CPU Cooling Fan (CPUFAN1, CPUFAN2)

After you have seated the CPU properly on the processor, attach the 3-pin fan cable to the CPUFAN connector on the Motherboard. The fan will stop when the system enters into Suspend Mode. (Suspend mode can be enabled from the BIOS Setup Utility, [POWER MANAGEMENT] menu.)

To avoid damage to the system, install according to the following pin assignment:

CPU Cooling Fan

(CPUFAN1, CPUFAN2)

CPUFAN Pin Assignment

CPUFAN1

1	2	3
GND	12V		TAC

CPUFAN2

1 2 3

GND 12V NC

26