SOYO P4X400 3-5.2 SuperIO Device

BIOS Setup Utility SY-P4X400 DRAGON Lite
63
3-5.2 SuperIO Device
Caution: Change these settings only if you are already familiar
with the Chipset.
The [SuperIO Device] option changes the values of the chipset registers.
These registers control the system options in the computer.
The following screen shows setup default settings.
CMOS Setup Utility – Copyright ( C ) 1984-2002 Award Software
SuperIO Device
Onboard FDC Controller Enabled
Onboard Serial Port 1 3F8/IRQ4 Item Help
Onboard Serial Port 2 2F8/IRQ3
UART Mode Select Normal
x RxD , TxD Active Hi, Lo
x IR Transmission Delay Enabled
x UR2 Duplex Mode Half
x Use IR Pins IR-Rx2Tx2
Onboard Parallel Port 378/IRQ7
Parallel Port Mode SPP
x EPP Mode Select EPP1.7
x ECP Mode Use DMA 3
Menu Level 
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
After you have completed the changes, press [Esc] and follow the
instructions on your screen to save your settings or exit without saving.