1.Make sure that you have installed the VIA 4 in 1 driver.

2.Install/ re-install the VGA driver.

After wake-up from Suspend to RAM or Standby mode, the screen has no display but I can hear the hard disk operating

1.Install VIA 4 in 1 driver.

2.Check the VGA card manufacturer for driver update, or make sure the VGA card support Suspend to Ram function.

Audio Issue

How can I disable the on-board Audio?

Go to the SOYO Combo Feature in the BIOS setup, then set the “onboard 6CH H/W audio” to disable.

I cannot get the sound working on my system.

1.Check if the speaker wire is connected to the line out connector in the M/B.

2.Check if the speaker power is powered on.

3.Install the audio driver supplied on our driver disc.

4.Check BIOS setup if “onboard 6CH H/W audio” is enabled.

5.If sound already installed, check our website for audio driver update.

I cannot get the sound working on the 5.1 channel speaker.

1.Install the audio driver and application. Check driver installation for more info.

2.Check if the settings in the 5.1 speaker control box are correct, like if you have a SPDIF connector but the setup in the speaker box is set to analog.

3.Check if the speaker connection to the M/B is correct.

4.Make sure the software setup is correct. Check manual for more info.

The sound is working in my system, but when I play CD music from the CD-ROM, I do not get any sound. What is wrong?

95

Page 100
Image 100
SOYO P4X400 specifications How can I disable the on-board Audio?, Cannot get the sound working on my system