SOYO P4X400 specifications IRQ/Event Activity Detect, PS2KB Wakeup Select

BIOS Setup Utility SY-P4X400 DRAGON Lite

IRQ/Event Activity Detect

Setting Description Note

PS2KB Wakeup Select

Hot key	You can boot-up your system by PS/2 K/B	Default
Password	VIA hotkey or password.

PS2KB Wakeup from S3/S4/S5

Disabled

Ctrl+F1 ~ F12

Power

Wake

Any Key

You can set the following hotkey :	Default
1. Disable
2. Choose CTRL+F1 up to F12
3. The power key in the K/B. (if available)

4.The wake-up key in the K/B. (if available)

5.Any key in the K/B.

VGA

ON	When On of VGA, any activity from one of
OFF	the listed system peripheral devices or IRQs	Default
	wakes up the system.

LPT & COM

HDD & FDD

LPT/COM	When On of LPT & COM, any activity from	Default
NONE,	one of the listed system peripheral devices or
LPT,	IRQs wakes up the system.
COM
OFF
	When On of HDD & FDD, any activity from
ON	one of the listed system peripheral devices	Default
	wakes up the system.

PCI Master	OFF	When On of PCI Master, any activity from	Default
	ON	one of the listed system peripheral devices
		wakes up the system
	Disabled		Default
PowerOn by PCI		If enabled any PCI interrupt will wake up the
Card	Enabled	system.
Wake Up On	Disabled	An input signal on the serial Ring Indicator	Default
LAN/Ring	Enabled	(RI) line (in other words, an incoming call
		on the modem/LAN) awakens the system
		from a soft off state.
RTC Alarm	Disabled	The system ignores the alarm.	Default
Resume	Enabled	Set alarm to power on the system by the date
		(1-31) or time (hh:mm:ss). If the date is set
		to [0], the system will self-power on by
		alarm everyday at the set time.

68