![](/images/new-backgrounds/1184715/18471517x1.webp)
Setting Up the Notebook
Inserting a Battery Pack
If your notebook shipped without an optional battery pack, proceed to the next section, “Opening the Notebook.”
If your notebook shipped with a battery pack:
1.Turn the notebook underside up on a flat surface.
2.Lower the battery pack into the battery bay at a slight angle 1, then press downward until the battery pack is seated 2.
3.Slide the 2 battery pack locking latches to the locked position 3.
Installing a battery pack
ÄCAUTION: To ensure that the correct drivers load and to prevent file corruption or damage to components during initial setup, do not remove the battery pack until the notebook has been connected to external AC power.
Getting Started |