Compaq V3500 manual Optical drive

Optical drive

NOTE: All optical drive spare part kits include an optical drive bezel.

Description	Spare part number
For use in computer models with Intel processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe	452055-001
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	452054-001
DVD/CD-RW Combo Drive	452053-001
For use in computer models with AMD processors:
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe	455830-002
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive	455829-002
DVD/CD-RW Combo Drive	455828-002

Before removing the optical drive, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 46).

Remove the optical drive:

1. Position the computer with right side toward you.

2. Remove the Phillips PM2.5×9.0 screw (1) that secures the optical drive to the computer.

3. Insert a thin tool, such as a paper clip (2), into the release access. (The optical drive media tray is partially ejected from the optical drive.)

Component replacement procedures 57