Speaker assembly
Description | Spare part number |
|
|
Speaker assembly |
|
|
|
Before removing the speaker assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.
4. Remove the battery (see Battery on page 46).
5. Remove the following components:
a. Hard drive (see Hard drive on page 47)
b. Wireless module compartment cover (see WLAN module on page 50)
c. Optical drive (see Optical drive on page 57)
d. Keyboard (see Keyboard on page 59)
e. Switch cover (see Switch cover on page 62)
f. Display assembly (see Display assembly on page 64)
g. Top cover (see Top cover on page 70)
Remove the speaker assembly:
1. Disconnect the speaker cable (1) from the system board.
2. Remove the two Phillips PM2.5×4.0 screws (2) that secure the speaker assembly to the computer.
82 Chapter 4 Removal and replacement procedures
