Compaq V3500 manual

f. Top cover (see Top cover on page 70)

g. Wireless switch board (see Wireless switch board on page 75) h. Audio board (see Audio board on page 78)

i. Bluetooth module (see Bluetooth module on page 79) j. USB board (see USB board on page 80)

k. System board (see System board on page 85) Remove the ExpressCard assembly:

1. Turn the system board upside down, with the RJ-45 connector toward you.

2. Lift the insulation material (1) from the system board to expose the ExpressCard assembly rear screws.

3. Remove the four Phillips PM2.0×4.0 screws (2) that secure the ExpressCard assembly to the system board.

4. Turn the system board right-side up, with the RJ-45 connector toward you.

88 Chapter 4 Removal and replacement procedures