Concord Camera Using Jenoptik C 3.1 SL AS a WEB Camera for Windows only, Installation Message

USING JENOPTIK C 3.1 SL AS A WEB CAMERA (FOR WINDOWS ONLY)

USING JENOPTIK C 3.1 SL AS A WEB CAMERA (FOR WINDOWS ONLY)

Note : You must install the camera’s driver before using the web camera.

1.Slide the Function switch to (Capture mode).

2.Make sure that the camera is securely connected to your computer .

3.Turn on your camera.

•The computer will automatically find your camera and install it for the first time connecting the camera to your computer, the installation message will vary on the different Windows Operating Systems(See the “INSTALLATION MESSAGE”).

4.Launch Microsoft NetMeeting software.

Note: For Win ME/2000, click on “Start>Program>Accessories>Communication>NetMeeting” to launch NetMeeting software.

For Win 98SE/XP, click “Start>Run”, type “conf” to launch NetMeeting software.

Or

If you do not have NetMeeting already installed on your computer, please visit www.microsft.com for instructions on how to download it onto your computer.

INSTALLATION MESSAGE

For Win 98SE

1.The following message will pop up, indicating that the Windows system recognizes a new device and is searching for the driver.

2.The following message will pop up to ask for insertion of Windows 98SE CD-ROM. Insert the Windows 98SE CD- ROM into the CD-ROM drive, then click “OK”.

3.Click “Browse” to find the driver.

36