KVM Switch 
Figure 2: A cascade StreamLine configuration
Throughout this manual, Master is the StreamLine KVM switch that connects directly to the drawer. Slave is a StreamLine KVM switch that has its CONSOLE port connected to a Master's “PC x” port. Slave only exists in cascade configuration.
------------------------ Installation Device Connection
Determine the port number of each computer. For computers using PS/2 mouse, connect the computer's mouse and keyboard cables to the StreamLine’s connectors marked with a mouse and keyboard respectively, as shown in figure 4 . Repeat this step for PC 1 to PC 8.
5
KVM Switch 
Figure 4: Master computer connection
For computers using serial mouse, connect the
Figure 5: Serial (AT) mouse and PS/2 mouse connection
A slave KVM switch may be mounted to the rear vertical poles inside a rack cabinet by the rear brackets with keyboard, mouse, monitor connectors facing out, as figure 6.
Figure 6: Slave KVM switch and rear bracket attachment
6
