4
Do not remove your current cover.

SV278/SV278W I.S. 10/21/03 11:12 AM Page 4

Step 7: Attach copper (or green) colored ground wire (coming from the fixture coverplate) to house ground wire using wire nuts provided.

Step 8: Remove fixture from hook and discard hook. Attach fixture to the mounting bracket using the center bolt provided. Insert plastic color matched plug in center bolt hole for finished appearance.

Step 9: Apply silicone caulking around edges of coverplate and in any open holes to provide a watertight seal from rain and moisture.

Step 10: Turn power on at main fuse/breaker box.

ENGLISH

How to operate your fixture

Step 1: Move slide switch on bottom of the sensor to “TEST”. Set sensitivity slide switch to medium or “M” (O).

Step 2: Turn on the power to fixture. Allow fixture to warm up approximately 90 seconds before testing. (Lights may or may not come on during warm-up period, this is normal.)

Step 3: Aim sensor head in desired position. NOTE: Maintain air spacing between lamps and sensor head, at least 1”. Make sure sensor head is positioned with control switches facing towards the ground.

Step 4: Walk across the detection zone at the farthest distance you wish your detector to detect motion.

Step 5: Adjust sensitivity until you get desired results. For more range, aim sensor head slightly upwards. For less range, aim sensor head slightly downward. Lights will turn off 4 seconds after all motion stops.

MODE

TEST

 

SENSITIVITY

4 MIN

AUTO

H

12 MIN

 

M

 

ON

2 HR

 

 

TIME

L

4 HR

NIGHT

 

6 HR

 

O

Step 6: Move slide switch to 4 MIN or 12 MIN (AUTO mode), or to one of the three “NIGHT TIME ON” settings. At dusk, lights will operate in the AUTO or Night Time On settings.

Installing your light switch cover

This cover will only fit standard residential light switch toggles up to 1/4” wide. The light switch cover prevents children and adults from accidentally turning off the power to this motion light fixture. By inadvertently turning off the power, the mode of operation may be changed. If the mode of operation needs to be changed, just flip up the light cover to find a helpful guide at your fingertips with quick and easy instructions which will allow you to select the mode of your choice. NOTE: The modes of operation ONLY apply to this

light.

Step 1: Turn off the power at the main fuse/breaker

box.

Place over

Step 2: Locate the inside light switch that will control

existing cover

your motion

 

activated light.

 

Step 3: If you have a single light switch, remove the two screws that are holding your cur-

 

rent cover in place. NOTE: DO NOT REMOVE THE COVER. The Regent light

 

switch cover is designed to fit over your existing cover! If you have a bank of light

 

switches (several switches together), locate the one switch that will control your

 

motion light. Remove the two screws, one directly above and one directly below

 

the switch.

Step 4:

Open the lid on your light switch cover. Align the holes on the light switch cover

 

over the holes in your current cover. Re-insert the screws to secure it in place.

 

NOTE: If your screws are not long enough, it may be necessary for you to

 

replace them with longer screws to secure the light switch cover over your exist-

 

ing cover (R).

Step 5: Turn on the power at the main fuse/breaker box.

Step 6:

Turn the light switch to the “ON” position and close the lid on your light switch

 

cover.

Page 3 Page 5
Page 4
Image 4
Cooper Lighting CSV278W instruction manual English, Installing your light switch cover
Page 3 Page 5

SV278W, CSV278W, SV278, CSV278 specifications

Cooper Lighting's CSV278, SV278, SV278W, and CSV278W models represent a significant advancement in lighting technology, tailored for various applications. These fixtures are designed with energy efficiency, optimal performance, and versatile functionality in mind, making them suitable for both commercial and industrial environments.

The CSV278 and SV278 models showcase a sleek, low-profile design coupled with powerful illumination capabilities. They utilize advanced LED technology, providing high lumen output while minimizing energy consumption. This makes them an excellent choice for supermarkets, warehouses, and large retail spaces where bright, consistent lighting is crucial for visibility and safety. The strategic integration of LEDs ensures a longer lifespan and reduced maintenance costs, enhancing the overall value of the lighting solution.

Both series feature customizable options for light distribution, which allows for precise control over how light is spread across the area. This versatility means that these fixtures can be tailored to meet the specific needs of various spaces, whether it be in aisle lighting, task areas, or general ambient illumination. Additionally, the SV278W and CSV278W models are designed for wet or damp locations, offering added durability without compromising performance.

One of the standout features of the Cooper Lighting series is their compatibility with smart lighting controls. These fixtures can be easily integrated into lighting management systems that allow for remote operation, dimming capabilities, and monitoring energy usage. This modern approach aligns with sustainability goals, enabling facilities to reduce their carbon footprint while potentially lowering operating costs.

The construction of the CSV278, SV278, SV278W, and CSV278W fixtures is another aspect that sets them apart. Made from robust materials, they are designed to withstand harsh environments, whether indoors or outdoors. Their durability not only extends their lifespan but also assures reliability in demanding settings.

In summary, Cooper Lighting's CSV278, SV278, SV278W, and CSV278W models are at the forefront of modern illumination solutions. With their energy-efficient LED technology, customizable light distribution, compatibility with smart controls, and robust construction, these fixtures offer an optimal lighting experience tailored to a wide variety of applications. Investing in these advanced lighting solutions ensures that spaces are well-lit, energy-efficient, and conducive to productivity and safety.
Top Page Image Contents