7. Remove parts from sanitizing solution and place on clean paper towels.

NOTE: Use Dow-Corning DC-111 (P/N 321471000) light grade silicone lubricant.

8.Assemble dispensing valve as follows:

A.Lubricate caged O-ring. Carefully install caged O-ring on valve from straight end (opposite tapered end). Lubricate grooves in which O-ring rides to fill in all void areas around O-ring.

B.Carefully install valve with caged O-ring in dispensing valve body.

C.Install spring fitting, knob and lever parts, torsion spring, and spring housing assembly by reversing removal procedure. Do not tighten down hold-down plates securing spring housing at this time.

D.Turn spring housing to the left (counterclockwise) to put tension on torsion spring, then tighten hold-down plates to secure spring housing.

E.Test dispensing valve to make sure it closes by itself when lever is released. If not, readjust torsion spring tension.

9.Thoroughly clean RELIEF VALVE (item 9), then screw relief valve into FACEPLATE (item 8).

10. Service beater drive shaft seal assembly as follows:

NOTE: Use Dow-Corning DC-111 (P/N 321471000) light grade silicone lubricant.

A.Pull BEATER (item 13) and SCRAPER BLADES (item 2) from freeze cylinder.

B.Pull beater drive shaft seal assembly from freeze cylinder socket using seal puller, Cornelius (P/N 322063000) from front side. Disassemble shaft seal assembly and discard O-rings.

NOTE: If old lubricant cannot be removed from plastic sleeve by washing, use nylon ‘‘pot and pan’’ scrubber (3M Company ‘‘Scotchbrite’’, or equivalent) to remove residue. Do not scrape sleeve. Replace any sleeve that has rough edges in O-ring sealing areas.

C.Remove old lubricant from plastic sleeve and stainless steel seal retainer with paper towels. Do not scrape the sleeve. Wash sleeve, retainer, and socket and back of freeze cylinder in warm water.

D.Install No. 1 stationary O-ring in groove of plastic sleeve and No. 2 stationary O-ring in inner groove of stainless steel seal retainer. Lubricate both O-rings.

E.Install new ‘‘running’’ O-rings No. 3 and No. 4 in outer grooves of stainless steel seal retainer, then lubricate O-rings with generous amount of special light grade silicone grease.

F.Slide stainless steel seal retainer in plastic sleeve until ‘‘running’’ O-ring No. 3 is just covered by plastic sleeve, as shown in View B of Figure 8.

G.Carefully place shaft seal assembly over beater drive shaft and locate slots of seal retainer on drive shaft pin. Then, carefully and simultaneously, push and turn plastic sleeve to locate locking tabs on sleeve in notches of freeze cylinder retainer. When tabs are seated in notches, press assembly firmly in place.

H.Position SCRAPER BLADES (item 2) on BEATER (item 13) as shown in Figure 3. Slide beater into freeze cylinder so slotted hooks engage DRIVE PIN (item 17) on DRIVE SHAFT (item 24). Turn beater to the right (clockwise) to lock in place.

I.Lubricate O-RING (item 5) with water to facilitate faceplate installation. Position O-RING (item 5) on FACEPLATE (item 8). Install faceplate on Unit so dispensing valve spout faces down. Tighten hex nuts until faceplate touches freeze cylinder all around flange. CAUTION - DO NOT OVERTIGHTEN HEX NUTS.

29

326142000

 

Page 35 Page 37
Page 36
Image 36
Cornelius 326142000 service manual
Page 35 Page 37

326142000 specifications

Cornelius 326142000 is an innovative and cutting-edge device that has garnered significant attention in the tech world due to its unique features and capabilities. Designed with a focus on functionality and efficiency, this model represents a significant leap forward in its category.

At the heart of Cornelius 326142000 is a powerful processor that ensures seamless multitasking and high performance. With advanced processing capabilities, it can handle complex tasks effortlessly, making it ideal for users who require both speed and efficiency. Whether for professional applications or daily activities, this device promises to meet diverse needs.

The design of the Cornelius 326142000 is both sleek and user-friendly. Its ergonomic design allows for comfortable usage, while the lightweight build enhances portability. The device is equipped with a high-resolution display that delivers vibrant colors and crisp details, providing an immersive visual experience. This is particularly appealing for tasks that require precision, such as graphic design or video editing.

In terms of connectivity, Cornelius 326142000 includes various options. It features advanced wireless technologies, such as Bluetooth 5.0 and Wi-Fi 6, ensuring fast and reliable connections. This makes it suitable for users looking to stay connected, whether in a work environment or at home.

The device integrates cutting-edge security features to protect user data. With biometric authentication options such as fingerprint scanners and facial recognition, users can rest assured that their information is secure. Additionally, regular firmware updates and built-in antivirus systems enhance its overall security.

Another standout characteristic is its energy efficiency. Cornelius 326142000 incorporates the latest power-saving technologies, allowing it to operate for extended periods without compromising performance. This aspect is particularly beneficial for users who are often on the go and need a device that can keep up with their lifestyle.

Lastly, the Cornelius 326142000 supports a range of software applications, offering versatility for users across different industries. Whether for education, business, or entertainment, the device's compatibility with various programs makes it a valuable tool for productivity.

In summary, the Cornelius 326142000 is a remarkable device that combines robust performance, sleek design, and advanced technologies, making it an excellent choice for anyone seeking reliability and efficiency in their tech gadgets.
Top Page Image Contents