Manuals / Cornelius / Kitchen Appliance / Beverage Dispenser

Cornelius 326142000 service manual Adjusting Plain Water Pressure Regulator

Models: 326142000

1 87
Download 87 pages 28.2 Kb
Page 40
Image 40

1.Press ‘‘OFF 1’’ and ‘‘OFF 2’’ switches on Unit control panel to stop refrigeration system and beaters motors.

2.Remove condenser coil access panel as instructed.

3.Clean condenser coil with vacuum cleaner, low pressure compressed air, or a soft brush.

4.Install condenser coil access panel by reversing removal procedure.

5.Press ‘‘AUTO 1’’ and ‘‘AUTO 2’’ switches on Unit control panel to start refrigeration system and beaters motors.

ADJUSTMENTS

ADJUSTING PLAIN WATER PRESSURE REGULATOR

(see Figures 2 and 12)

Carbonator plain water inlet adjustable water pressure regulator is factory adjusted to 45-psi and should not be readjusted.

ADJUSTING CARBONATED WATER FLOW RATE

The back carbonated water flow regulators (see Figures 2 and 6), which control carbonated water flow rate into product blender tanks, are factory adjusted for flow rate of 1.5 ± 0.05 ounces per second and normally do not require adjustment. However, if adjustment is necessary, proceed as follows:

1.Press applicable ‘‘OFF 1’’ or ‘‘OFF 2’’ switch to prevent more product from entering applicable product blender tank.

2.Disconnect Unit syrup inlet line from applicable soft drink tank.

3.Remove applicable side panel from Unit as instructed for access to applicable carbonated water flow regulator, product shutoff valve, and product sample valve.

4.Close applicable product shutoff valve to prevent more product from entering freeze cylinder.

5.Place container under applicable product sample valve. Open valve and allow all product to be purged from product blender tank, then close valve.

6.Remove lower front access panel as instructed for access to secondary CO2 regulators.

7.Note pressure setting on secondary CO2 regulator with 60-psi gage for product blender tanks. Turn regulator adjusting screw out (counterclockwise) until gage reads 0-psi. Pull up on applicable product blender tank relief valve to release CO2 pressure from tank.

8.Disconnect carbonated water line from outlet side of applicable carbonated water flow regulator.

9.Connect line, long enough to reach to outside of Unit, to water flow regulator outlet, then route line to outside of Unit.

10.Place end of carbonated water line, routed to outside of Unit, in container.

11.Press applicable ‘‘AUTO BLEND 1’’ or ‘‘AUTO BLEND 2’’ switch to activate electrically operated carbonated water solenoid.

12.When steady stream of water is flowing from added length of line, catch carbonated water in container graduated in ounces for exactly 10-seconds. Press applicable ‘‘FILL 1’’ or ‘‘FILL 2’’ switch to deactivate carbonated water solenoid. In 10-seconds, 14 to 16-ounces of water should have been dispensed.

13.If adjustment is necessary, loosen jam nut on carbonated water flow regulator. Turn regulator adjusting screw to the left (counterclockwise) to reduce carbonated water flow rate or turn screw to the right (clockwise) to increase flow rate. Tighten jam nut and tap on regulator to register adjustment.

33

326142000

 

Page 39 Page 41
Page 40
Image 40
Cornelius 326142000 service manual Adjusting Plain Water Pressure Regulator, Adjusting Carbonated Water Flow Rate
Page 39 Page 41

326142000 specifications

Cornelius 326142000 is an innovative and cutting-edge device that has garnered significant attention in the tech world due to its unique features and capabilities. Designed with a focus on functionality and efficiency, this model represents a significant leap forward in its category.

At the heart of Cornelius 326142000 is a powerful processor that ensures seamless multitasking and high performance. With advanced processing capabilities, it can handle complex tasks effortlessly, making it ideal for users who require both speed and efficiency. Whether for professional applications or daily activities, this device promises to meet diverse needs.

The design of the Cornelius 326142000 is both sleek and user-friendly. Its ergonomic design allows for comfortable usage, while the lightweight build enhances portability. The device is equipped with a high-resolution display that delivers vibrant colors and crisp details, providing an immersive visual experience. This is particularly appealing for tasks that require precision, such as graphic design or video editing.

In terms of connectivity, Cornelius 326142000 includes various options. It features advanced wireless technologies, such as Bluetooth 5.0 and Wi-Fi 6, ensuring fast and reliable connections. This makes it suitable for users looking to stay connected, whether in a work environment or at home.

The device integrates cutting-edge security features to protect user data. With biometric authentication options such as fingerprint scanners and facial recognition, users can rest assured that their information is secure. Additionally, regular firmware updates and built-in antivirus systems enhance its overall security.

Another standout characteristic is its energy efficiency. Cornelius 326142000 incorporates the latest power-saving technologies, allowing it to operate for extended periods without compromising performance. This aspect is particularly beneficial for users who are often on the go and need a device that can keep up with their lifestyle.

Lastly, the Cornelius 326142000 supports a range of software applications, offering versatility for users across different industries. Whether for education, business, or entertainment, the device's compatibility with various programs makes it a valuable tool for productivity.

In summary, the Cornelius 326142000 is a remarkable device that combines robust performance, sleek design, and advanced technologies, making it an excellent choice for anyone seeking reliability and efficiency in their tech gadgets.