4.Remove right-hand side panel as instructed for access to No. 2 product blender tank product shutoff valve.

5.Close No. 2 product blender tank product shutoff valve to prevent product bleeding back into No. 1 product blender tank during sanitizing procedure.

IMPORTANT: The following CO2 and liquid disconnects disconnecting and connecting procedure for soft drink tank replacement or filling soft drink tank in place must be performed in order as follows:

To disconnect soft drink tank from Unit syrup system.

A.Disconnect liquid disconnect soft drink tank. NOTE - Disconnecting liquid quick disconnect from soft drink tank first prevents syrup from backflowing through Unit syrup flow regulator which may alter regulator adjustments.

B.Second, disconnect CO2 quick disconnect from soft drink tank.

To connect soft drink tank into Unit syrup system.

C.First, connect CO2 quick disconnect to soft drink tank to pressurize tank.

D.Second, connect liquid quick disconnect to soft drink tank.

6.Disconnect soft drink tank containing syrup from No. 1 syrup system.

7.Connect clean empty soft drink tank into No. 1 syrup system.

8.Place waste container under No. 1 cylinder dispensing valve nozzle. Open dispensing valve and dispense all product from cylinder. As product level lowers in cylinder, partially close valve to avoid spurting.

9.Remove Unit front lower access panel as instructed for access to No. 1 product blender tank product sample valve.

10.Place waste container under No. 1 product blender tank product sample valve. Slowly open valve and purge remaining product out of tank, then close valve.

11.Disconnect empty soft drink tank from No. 1 syrup system.

12.Refer to DISPENSING VALVES CAGED O-RINGS AND DRIVE SHAFTS SEALS ASSEMBLIES under LUBRICATION and perform procedure to lubricate dispensing valve caged O-ring and drive shaft seal assembly.

WARNING: To avoid possible injury or property damage, do not attempt to remove soft drink tank cover until CO2 pressure has been released from tank.

13. Pull up on empty soft drink tank cover relief valve to release CO2 pressure from tank.

WARNING: If powder type sanitizer is used, it must be thoroughly dissolved with water prior to adding to soft drink tank.

NOTE: Sanitizing solution is used in a more concentrated form because it will be diluted approximately four-to-one in product blender tank.

14.Using clean empty soft drink tank, prepare full tank of sanitizing solution using Chlor-Tergent (Oakite Product, Inc.) or equivalent sanitizer. Mix sanitizing solution by using 70° F to 100° F (max) plain water and 2.65 oz./gallon sanitizer. This mixture will provide 800-ppm of chlorine. Sanitizing solution will be diluted to approximately 200-ppm inside product blender tank after carbonated water has been mixed with sanitizing solution.

15.Shake sanitizing solution tank to thoroughly mix solution, then connect tank into No. 1 syrup system.

16.Press ‘‘FILL 1’’ switch to fill No. 1 syrup system syrup float switch with sanitizing solution ‘‘SYRUP 1’’ fault message on message display will go out indicating syrup float switch has been filled with sanitizing solution.

326142000

46

Page 52 Page 54
Page 53
Image 53
Cornelius 326142000 service manual
Page 52 Page 54

326142000 specifications

Cornelius 326142000 is an innovative and cutting-edge device that has garnered significant attention in the tech world due to its unique features and capabilities. Designed with a focus on functionality and efficiency, this model represents a significant leap forward in its category.

At the heart of Cornelius 326142000 is a powerful processor that ensures seamless multitasking and high performance. With advanced processing capabilities, it can handle complex tasks effortlessly, making it ideal for users who require both speed and efficiency. Whether for professional applications or daily activities, this device promises to meet diverse needs.

The design of the Cornelius 326142000 is both sleek and user-friendly. Its ergonomic design allows for comfortable usage, while the lightweight build enhances portability. The device is equipped with a high-resolution display that delivers vibrant colors and crisp details, providing an immersive visual experience. This is particularly appealing for tasks that require precision, such as graphic design or video editing.

In terms of connectivity, Cornelius 326142000 includes various options. It features advanced wireless technologies, such as Bluetooth 5.0 and Wi-Fi 6, ensuring fast and reliable connections. This makes it suitable for users looking to stay connected, whether in a work environment or at home.

The device integrates cutting-edge security features to protect user data. With biometric authentication options such as fingerprint scanners and facial recognition, users can rest assured that their information is secure. Additionally, regular firmware updates and built-in antivirus systems enhance its overall security.

Another standout characteristic is its energy efficiency. Cornelius 326142000 incorporates the latest power-saving technologies, allowing it to operate for extended periods without compromising performance. This aspect is particularly beneficial for users who are often on the go and need a device that can keep up with their lifestyle.

Lastly, the Cornelius 326142000 supports a range of software applications, offering versatility for users across different industries. Whether for education, business, or entertainment, the device's compatibility with various programs makes it a valuable tool for productivity.

In summary, the Cornelius 326142000 is a remarkable device that combines robust performance, sleek design, and advanced technologies, making it an excellent choice for anyone seeking reliability and efficiency in their tech gadgets.
Top Page Image Contents