ADJUSTING BRIX (WATER-TO-SYRUP) ‘‘RATIO’’ OF DISPENSED PRODUCT

(see Figures 2 and 6)

1.Remove Unit front lower access panel as instructed for access to product blender tanks secondary CO2 regulators and product sample valves.

2.Check product blender tanks secondary CO2 regulators, with 60-psi gages, for proper pressure settings which is set at 30-psi for best textured dispensed product. If adjustment is necessary, adjust as instructed.

3.Remove both Unit side panels as instructed for access to product shutoff valves located close to product blender tanks.

4.Close product shutoff valve in line between applicable product blender tank and associated freeze cylinder BRIX adjustment will be performed on.

5.Press applicable ‘‘FILL 1’’ or ‘‘FILL 2’’ switch to prevent more product from filling product blender tank.

6.Open applicable product blender tank product sample valve and take sample (approximately 6-ounces) of product in cup.

NOTE: Temperature compensated hand-type refractometers (P/N 511004000) are available from the Cornelius Company.

7.Check product BRIX with a temperature compensated hand-type refractometer. BRIX should read 13 ± 1. If BRIX is not within tolerance, adjust applicable white syrup flow regulator as follows:

A.Loosen jamb nut on applicable syrup flow regulator.

B.Turn syrup flow regulator adjusting screw to the left (counterclockwise) no more than 1/8-turn at a time to reduce syrup flow rate or turn screw to the right (clockwise) no more than 1/8-turn to increase flow rate.

C.Tighten jamb nut on syrup flow regulator, then lightly tap regulator to register adjustment.

8.Place container under applicable product sample valve. Open valve to purge product out of product blender tank, line, and valve, then close valve.

9.Press applicable ‘‘AUTO BLEND 1‘’ or ‘‘AUTO BLEND 2’’ switch to fill product blender tank 1/4-full of new batch of product. When product blender tank is 1/4-full of product, press applicable ‘‘FILL 1’’ or ‘‘FILL 2’’ switch to prevent more product from entering product blender tank.

10.Repeat steps 6 and 7 preceding to check product sample for BRIX.

11.Repeat steps 7 through 10 preceding until proper BRIX adjustment is achieved.

12.Open product shutoff valve in line between product blender tank and freeze cylinder.

13.Press applicable ‘‘AUTO BLEND 1’’ or ‘‘AUTO BLEND 2’’ switch.

14.Install Unit side panels and front lower access panel by reversing removal procedures.

PRODUCT CARBONATION ADJUSTMENT

(see Figures 2 and 6)

Carbonation of dispensed product can also be varied to suit consumer preference by adjusting Unit carbonator secondary CO2 regulator as follows:

IMPORTANT: Carbonator tank secondary CO2 regulator must be adjusted 25-psi higher or more above product blender tanks secondary CO2 regulators pressure settings. Carbonated water and syrup pressures must be able to overcome and vent product blender tanks head pressures while tanks are filling with carbonated water and syrup. Carbonator tank secondary CO2 regulator not adjusted high enough will cause decreased flow of carbonated water into blender tanks which will increase BRIX of dispensed product.

35

326142000

 

Page 41 Page 43
Page 42
Image 42
Cornelius 326142000 Adjusting Brix WATER-TO-SYRUP ‘‘RATIO’’ of Dispensed Product, Product Carbonation Adjustment
Page 41 Page 43

326142000 specifications

Cornelius 326142000 is an innovative and cutting-edge device that has garnered significant attention in the tech world due to its unique features and capabilities. Designed with a focus on functionality and efficiency, this model represents a significant leap forward in its category.

At the heart of Cornelius 326142000 is a powerful processor that ensures seamless multitasking and high performance. With advanced processing capabilities, it can handle complex tasks effortlessly, making it ideal for users who require both speed and efficiency. Whether for professional applications or daily activities, this device promises to meet diverse needs.

The design of the Cornelius 326142000 is both sleek and user-friendly. Its ergonomic design allows for comfortable usage, while the lightweight build enhances portability. The device is equipped with a high-resolution display that delivers vibrant colors and crisp details, providing an immersive visual experience. This is particularly appealing for tasks that require precision, such as graphic design or video editing.

In terms of connectivity, Cornelius 326142000 includes various options. It features advanced wireless technologies, such as Bluetooth 5.0 and Wi-Fi 6, ensuring fast and reliable connections. This makes it suitable for users looking to stay connected, whether in a work environment or at home.

The device integrates cutting-edge security features to protect user data. With biometric authentication options such as fingerprint scanners and facial recognition, users can rest assured that their information is secure. Additionally, regular firmware updates and built-in antivirus systems enhance its overall security.

Another standout characteristic is its energy efficiency. Cornelius 326142000 incorporates the latest power-saving technologies, allowing it to operate for extended periods without compromising performance. This aspect is particularly beneficial for users who are often on the go and need a device that can keep up with their lifestyle.

Lastly, the Cornelius 326142000 supports a range of software applications, offering versatility for users across different industries. Whether for education, business, or entertainment, the device's compatibility with various programs makes it a valuable tool for productivity.

In summary, the Cornelius 326142000 is a remarkable device that combines robust performance, sleek design, and advanced technologies, making it an excellent choice for anyone seeking reliability and efficiency in their tech gadgets.
Top Page Image Contents