Cornelius PR150 BC manual Cleaning And Sanitizing Instructions, Cleaning Dispenser

69

67 66

65

77

73

FIGURE 4. AUGER ASSEMBLY

CLEANING AND SANITIZING INSTRUCTIONS

WARNING: Disconnect electrical power to the dispenser before cleaning. Do not use metal scrapers, sharp objects, or abrasives on the ice storage hopper, top cover, and the agitator disk as damage may result. Do not use solvents or other cleaning agents as they may

attack the plastic material.

Soap Solution – Use a mixture of mild detergent and warm (100° F) potable water.

Sanitizing Solution – Use 1/2–ounce of household bleach in one gallon of potable water. Preparing the sanitiz- ing solution to this ratio will create a solution of 200 PPM.

Cleaning Dispenser

1.CLEANING EXTERIOR SURFACES IMPORTANT: Perform the following daily.

A.Remove cup rest from the drip tray.

B.Wash the drip tray with soap solution. Rinse with potable water and allow solution to run down the drain.

620918702 12