![](/images/new-backgrounds/1178217/1782179x1.webp)
SLR • SLC • SLD OPERATOR INSTALLATION GUIDE
PAD MOUNTING INSTRUCTIONS FOR MODELS
SLR, SLC & SLD
Before installing, make sure the gate rolls or slides freely, and that all exposed rollers are properly covered. The gate must be covered with fabric with openings no larger than 2 1/4” in size, to a minimum height of 48 inches above ground level. On
To assemble the drive chain and gate brackets, refer to Page 6. Make sure that the chain sag does not exceed recommended sizes and that the chain does not come into contact with the moving parts of the gate or ground.
A SEPARATE PEDESTRIAN GATE IS REQUIRED
FOR ALL PEDESTRIAN TRAFFIC.
THIS GATE MUST BE A MINIMUM DISTANCE
OF SEVEN (7) FEET FROM THE
VEHICULAR GATE AND GATE OPERATOR.
- 5 - |