Country Flame’s Bayvue DV stove must be vented vertically or horizontally through an outside wall. This appliance and all its components are tested and safe to operate when installed in accordance with the instructions contained in this manual. Read and understand all instructions before beginning installation to ensure maximum efficiency and safety is achieved. Failure to follow the instructions contained in this manual will void the warranty and may present a fire hazard. Immediately, upon unpacking the product, report any glass or parts damaged, to both the shipping company and the local Country Flame Dealer.
Country Flame
FIGURE 1: BAYVUE DV DIMENSIONS
ALTITUDE LIMITATIONS
United States input ratings of this unit are based on sea level operation. No appliance input rating needs to be changed for any operation at elevations up to 2000 feet (600m). For operation at elevations above 2000 feet, the Bayvue DV’s input rating shall be reduced at the rate of 4% for each 1000 feet above sea level. Exception: As permitted by the authority having jurisdiction.
Canadian input ratings of this unit are based on seal level operation. No appliance input rating needs to be change up to 4500 feet above sea level in Canada. Installation of this appliance at altitudes above 4500 feet is subject to field test of the individual installation and approval by the local authority having jurisdiction.
GAS SUPPLY CONNECTION
A gas supply line must be installed by a qualified professional and must conform to National Standards; NFPA 54 (natural gas) or NFPA 58 (propane) as well as local codes. Connection of the gas supply line shall be made near the lower rear of the appliance. The gas supply line shall be purged of air before connection is made to the appliance. This
Version 1.0h | 6 |