28 NEUTON EM 4.1 Cordless Electric Mower Safety & Operating Instructions
The NEUTON Trimmer
The NEUTON™ Trimmer (Figure 27) is a unique
attachment that, used with your NEUTON Mower,
enables you t o trim and edge your lawn and yard
without having to buy a separate trimmer and edger
— like three machines in one.
The Trimmer is described in a separate manual, the
NEUTON™ Trimmer Safety & Operating Instr uctions
(which is shipped with the NEUTON Trimmer).
For more information about the NEUTON Trimmer
attachment, please contact Country Home Products at
1-(866)-NEUTON1 (638-8661) or visit us on the Web
at www.neutonowners.com.
Using the Rear Bagger
The r ear bagger lets you catch clippings as the y are cut, eliminating the need to rake. Before using it
though, you must first assemble it.

Assembling the Rear Bagger

The rear ba gger comes in thr ee parts: the bagger , a cover, and a steel frame. To assemble the rear
bag ger :
1. Attach the front of the steel frame to the front of the bagger. Mak e sure the frame is securely
snapped into place.
2. Snap the cover onto the bagger.
3. Snap the front of the cover onto the steel f rame.
Make sure all of the connections are secure befor e using the bagger.

Attaching the Rear Bagger

1. Raise the hing ed discharge guard on the rear of the
mower, and hold it open.
Remove the mulching plug or t he rear discharge plate, if
either is installed. (The plug is seated in the c hute by
“press fit” and it may be necessary to pull quite har d.)
2. With your other hand, insert the rear bagger into the
slots on both sides of the mo wer (Figur e 28).
3. Press the pin on the discharge guar d into the hole on
the top of the rear ba gger.
4. Lock the r ear bagger in place by sliding the or ange tab
on the handle over the dischar ge guard.
Figure 28. Attaching the rear
bagger
Figure 27. The NEUTON Trimmer
attached to your NEUTON Mower