NEUTON EM 4.1 Cordless Electric Mower Safety & Operating Instructions 29

Removing the Rear Bagger

1 Unlock the orange tab on the r ear bagger handle.
2. Raise the dischar ge guard, grab the rear ba gger by its handle and remove it by lifting it up while
pulling out.
3. Release the dischar ge guard.
Installing the Mulching Kit
To mulch your g rass, install both the mulching plug and
blade.
1. If necessary, remove the rear ba gger or the r ear
discharge plate fr om the mower.
2. Install the mulching plug (Figure 29). Be sur e to push the
plug all the way in until the notch in its bottom is
engag ed.
There’s a slight knack to installing the plug: push with a
slightly arcing motion. Align the plug in the mower, start to
push the top of the plug fir st then put pressure towards the
bottom and slide in the plug.
3. Remove the cutting blade and install the mulching b lade.
For detailed instructions, please refe r to “Removing and Attaching the Blade” in Cha pter 7.
Please refer to Figur e 30 for a comparison of the two
blades. Notice that the cutting blade has a long er
stabilizer in the blade’s center, and one edg e of both
ends is turned up. T he mulching b lade, on the other
hand, has a much smaller sta bilizer and does not have
any edges turned up.
Figure 30. Comparing the cutting blade
(top) with the mulching blade (bottom)
Figure 29. Installing the mulching
plug