End of Season and Storage
WHEN PERFORMING ANY MAINTENANCE, YOU MUST FIRST SHUT OFF THE ENGINE, WAIT FIVE (5) MINUTES TO ALLOW PARTS TO COOL AND DISCONNECT THE SPARK PLUG WIRE, KEEPING IT AWAY FROM THE SPARK PLUG.
NOTE: Please refer to the Engine Owner’s Manual for
•Change the Engine oil.
•If your DR
•Remove the Spark Plug and pour about 1 ounce of motor oil into the cylinder hole. Replace the Plug and pull the Recoil Starter Rope until you feel strong resistance. This will coat the Piston and seat the Valves to prevent moisture buildup.
•Clean or replace the Engine Air Filter. Reference the Engine Owner’s Manual.
•Clean dirt and debris from the Engine Cylinder Head Cooling Fins, Debris Screen, and Muffler.
•Clean out residual debris from the under the Debris Shield and Tine Assemblies.
•Lubricate the Tine Assemblies. See page 30.
•Touchup all rusted or chipped paint surfaces. Sand them lightly before painting.
•Be sure all Nuts, Bolts, and Screws are securely fastened.
•Inspect moving parts and the Tine Drive Belt for damage and wear; replace if necessary.
•Store the Battery in a dry area that will not freeze. If you will not use the machine over a long period, charge the battery every four to six weeks. See page 32.
•If possible, store your DR
•After the DR
36 DR®