Coway BA13-BR manual Installing your bidet, Removing existing toilet seat, Installing the product

Installing your bidet

Removing existing toilet seat

1. Remove the existing toilet seat ① and seat cover ② by removing the fixing nuts.

2

1

Tips Keep the removed toilet seat in a shaded location to prevent it from being damaged.

Installing the product

Tips

Caution

As the bidet should be installed on the toilet, ensure that water is not splashed onto the bidet.

There may be some water remaining inside the filter which was used to test the product during the inspection process at the factory. This does not mean that the product was previously used.

Cold main water supply

Make sure that the bidet is connected to the cold water pipe.

(If the product is connected to the hot water pipe, this may damage the filter and hose).

1. Turn off the main water supply valve ① and separate the existing water tank hose ②.

2

1

2. Connect the rubber packing, T-shaped connector, and water tank hose in this order to the existing water pipe. Please connect the bidet hose to the T-shaped connector.

Please ensure that the rubber packing is inserted between the water pipe and the T-shaped connector.

Firmly tighten the nuts below and on top of the T-shaped connector all the way to the end in a clockwise direction.

17