![](/images/new-backgrounds/1041001/4100137x1.webp)
Installing your bidet
Installing the product
3.Place the fixing slider over the installation plate on the toilet, insert the fixing bolts, and fasten the nuts so that the installation plate is fixed.
4.Align the back of the bidet to the installation plate and push the bidet backwards while pressing the button to the left of the bidet. (Hold the bidet with both hands and push it backwards until it clicks into place).
Check if the bidet moves to the left or right. If it moves, fasten the fixing nuts again.
5.Connect the bidet hose to the side of the bidet.
Make sure that the bidet hose is firmly connected. If the main water supply valve is opened when the hose is not connected properly, the bidet hose may become separated and cause water to splash, resulting in injury.
Take care that the bidet hose is not excessively bent by twisting it.
6.Open the main water supply valve.
7.Connect the power cord to the electrical outlet.
Make sure to use a grounded electrical outlet. In the case of a short circuit, grounding prevents electric shock or injury.
Make sure to use a dedicated electrical outlet with grounding Caution terminals.
If using an extension cord is unavoidable, use one with grounding terminals for 120 V~ / 60 Hz or higher.
18