Cleaning and maintaining your bidet
Cleaning the nozzles
If excessive force is exerted on the nozzles when cleaning them, the nozzles may no longer work properly or break. Hold the nozzles lightly when cleaning them.
Tips | When cleaning the nozzles, Nozzle cleaning water is emitted. (However, when main | |
water supply is not supplied (main water supply stop status), no nozzle cleaning water is | ||
| ||
| emitted and only the nozzle is extended). |
1. Press the ‘Nozzle Cleaning’ button on the operation part to the right of the bidet.
- Nozzle cleaning water is sprayed and the front nozzle is fully extended. - Clean the front nozzle.
2. Press the ‘Nozzle Cleaning’ button on the operation part again.
- Nozzle cleaning water is sprayed, the front nozzle retracts itself, and rear nozzle is extended fully.
- Clean the rear nozzle.
3. If you press the ‘Power’ button or the ‘Nozzle Cleaning’ button on the operation part again after cleaning the nozzles, nozzle cleaning water is sprayed, and the rear nozzle retracts itself.
- If no button is pressed for 2 minutes after the nozzle cleaning starts, the nozzle retracts itself automatically.
Cleaning the product body
Apply a neutral detergent to a soft cloth or sponge and clean the product. - Failing to do so may result in deformation or product damage.
| Do not use thinner or benzene. |
Tips | Do not clean the product using a coarse scrub or abrasive detergent. |
|
20
