Product features
1.Instant warm water system
The water is instantly heated when using the rear and front cleaning functions so that you can immediately use water at your desired temperature.
2.Air+ function
The water stream with air bubbles provides softer, stronger cleansing.
3.MESH Filter
The MESH filter is a
4.Eco mode
-Bidet eco mode: If the seat sensor does not detect someone sitting down or no panel or remote control button is pressed for approximately 10 minutes, the seat temperature is set to ‘L’, so that power consumption is reduced. When bidet eco mode is activated, the eco mode indicator on the front is turned on.
-Remote control eco mode: If no remote control button is pressed for approximately 5 seconds, the remote control display is turned off to reduce the power consumption of the remote control battery.
5.Stainless steel twin nozzle adopted for enhanced hygiene
By adopting Stainless steel nozzles, you can use the product more hygienically. In addition, the separation of the cleansing nozzle and the bidet nozzle ensures extra hygiene.
6.Wide Water Stream
A widely spread water stream applied to the cleaning water for smoother cleaning.
Additional functions for the
1.Wide function
You can directly select the degree of spread of the cleansing water from a strong flow of water to a soft,
2.Deodorization function
Once the seat sensor detects a person sitting, the deodorization function automatically deodorizes odors for 1 minute. After using the bidet, the deodorization function will remain on for 3minutes ensuring a refreshed feeling.
3.Sterilization function using oxidized silver
This bidet sterilizes the nozzle with oxidized silver sterilizing water.
Contents
1
Product features | 01 |
Contents | 01 |
Safety precautions | 02 |
Part Names | 07 |
Dimensions | 07 |
Front / Rear view | 08 |
Remote control | 08 |
Installation parts | 09 |
Check before using your product | 10 |
Please keep in mind! | 10 |
Configuring a special mode | 11 |
Checking the control panel | 12 |
Using your bidet | 15 |
Using the rear nozzle | 15 |
Using the front nozzle | 16 |
Installing your bidet | 17 |
Removing existing toilet seat | 17 |
Installing the product | 17 |
Installing the remote control wall mount | 19 |
Cleaning and maintaining your bidet | 20 |
Cleaning the nozzles | 20 |
Cleaning the product body | 20 |
Removing the product | 21 |
Cleaning the MESH filter | 21 |
SPECIFICATIONS | 23 |
troubleshooting | 24 |
warranty CARD | 25 |
