General | Recommendations |
|
| Periodically check all fasteners and make sure | |||
Always observe safety rules when performing any |
| these are tight. |
|
|
| ||
|
|
|
|
| |||
maintenance. |
|
|
|
|
|
| |
The warranty on this snow thrower does not cover | _ | WARNING: |
| Before lubricating, repairing, or | |||
items that | have been subjected to operator | abuse |
| inspecting, disengage all clutch levers and stop | |||
| engine. Wait | until all moving parts have come | |||||
or negligence. To receive full value from the |
|
| to a complete | stop. Disconnect | spark plug wire | ||
warranty, | operator must maintain the snow | thrower |
| and ground | it against the engine | to prevent | |
as instructed in this manual. |
|
| unintended | starting. |
| ||
Follow the maintenance schedule given below. |
|
|
|
|
| ||
Maintenance
Maint. | Tasks | Before | Aftereach | &fterfirst2 | |
|
|
| _=achuse | use | hours |
|
|
|
|
| operation |
Product: |
|
|
| ||
Lubricate pivotpoints |
| I | I | ||
Clean | equipment |
| ,/ |
| |
|
|
|
|
| |
Clean | skid shoe |
| ,/ |
| |
|
|
|
|
| |
Check | V belts |
|
|
| |
Engine: |
|
|
|
| |
Check | engine oil |
|
|
| |
Change | engine oil |
|
| _ | |
Check | spark plug I | I | I | I | |
Empty fuel system
Lubrication
Wheels: Oil or spray lubricant into bearings at wheels at least once a season. Pull ktick pin, remove wheels, clean and coat axles with a multipurpose automotive grease. See Figure 7.
Oil | bearings |
Klick Pin | , lubricant |
Figure 7
Schedule
Every25 Every50 Before Service Dates
hours hours storage operation operation
,,,
II_ I
,/
iiiiiiiiiii
,/
Gear Shaft: Lubricate the gear shaft with a good
IMPORTANT: When lubricating engine or draining oil, avoid spillage onto transmission parts.
Gear Case: The worm gear case has been filled with grease at the factory. If disassembled for any reason, lubricate with 2 ounces of shell grease.
IMPORTANT: Do not overfill the gear case. Damage to the seals could result. Be sure the vent plug is free of grease in order to relieve pressure.
Drive and Shifting Mechanism: Remove rear cover. Oil any chains, sprockets, gears, bearings, shafts, and shifting mechanism at least once a season. See Figure 8. Use engine oil or a spray
11
