Craftsman 286.17589 operating instructions Lubrication, Double Insulation, Extension Cords

LUBRICATION

Allofthebearings in this tool are lubricatedwith a sufficientamountof high-grade lubricantfor the life of the tool under normal operating conditions.Therefore, no further lubricationis required.

DOUBLE INSULATION

Double insulation is a conceptin safety in electric power tools,which eliminates the need for the standard 3-wire grounded powercord. All exposed metal parts are isolatedfrom the internal motor componentswith protectveinsulation.Double insulatedtools do not need to be grounded.

IMPORTANT

The servicingof a tool with double insulationrequiresextreme care and knowledge of the system and should be performedonly by a qualified service technician. For service, we recommend that you return the tool to your nearest Sears Service Center for repair.ALWAYS use originalfactory replacement parts when servicing.

EXTENSION CORDS

The use of any extension cord will cause some loss of power.To keep the loss at a minimum and to preventoverheating,use an extensioncord that is heavy enoughto carry the current that the toolwill draw.

A wire gauge (AWG) of at least 16 is recommendedfor an extensioncord 100 feet or less in length. When workingoutdoorsALWAYS use an extension cord that is suitablefor outdoor use. The cord'sjacket will be marked WA.

I

I/_the cordCAUTION:so it will notKeepgetextensioncordsawaycaughtlumber,tools,frometcthe. duringcuttingthearea,cuttingandoperationposition I

			I
it immediately. NEVER use a tool with a damaged cord because touching the			I
I/K DANGER:	Check extension cords before each use. if damaged,	replace
damaged area could cause electrical shock, resulting in serious injury.

Extension cords that are suitablefor use with your saw are available at your nearest Sears Store.

20