A'I-rACHING REPLACEMENT BLADES TO THE SAW (See Figs. 17 -20)

,/_ WARNING: ThisTwinCutter saw uses speciallydesigned5-in. blades

andno other types or sizes of blades shouldever be used.Othertypes and sizes
of.bladeswill notoperate safely in thissaw andcould result inserious personal
injury.
See the accessories section of this manual for the proper replacement blades
that are needed for this saw.
1,Unplug the saw,

,/_ WARNING: Failureto unplugthe saw could resultin accidentalstarting

causingpossibleserious personalinjury,
2, Lay the saw clown with the blade arborpointingupward.
3,Place blade "A" ontothe blade flange withthe "A"clearlyvisible(see Fig. 17).
4.Align the holeson the blade withthe pins onthe flange and securely fitthe blade
on the flange (see Fig, 18),
5.Take the arbor adapter "1"and push it downonto theflange withthe "1" clearly
visible.Make surethat the adapter is properlyseated overthe flat sidesof the
flange.(see Fig,18),
6,Place blade "B" onto the adapterwith the"B" easily visible,then thread lock nut
onto shaft.DO NOT tighten, (see Fig. 19).
7.Turn the blades so that the holes in both blades are lined up.
Flange
Fig. 18
I

I

Fig. 19
18