STARTING A CUT
IMPORTANT:
BEFORE usingthe Twin Cutter Saw for the first time, ALWAYS familiarize yourself
with the saw by making practicecuts in scrap materials,
The weight ofthis saw helps tomake thecutssmoother_ Learn howtosafely handle
and controlthe weight ofthe sawn
ALWAYS be sure that you position the bladesperpendicular to the plane of the
workpiece. Make the cut at an approximate 30°angle tothe workpiece surface,
(See Fig_5),,
Practice the proper feed speed rate for the materials being cut.
Engage f.he onloffswitch to startthe saw, ALWAYS let the blades reach full speed
before youbegfn the cut intothe workpiece,
IMPORTANT:When using your saw, ALWAYS stay alert and exercise control.
DO NOT remove your saw from the workpiece, while the blade is moving.
Blades perpendicular to workplace
Approximately 30°
Z_ WARNING: ALWAYS
maintain proper control of the saw
tomake sawing safer and easier_
Lossof control of the saw could
cause an acctdentresulting in
possible serious Injury,
Fig, 6
Wrong
NEVER hold the saw with just
one hand (see Hg_ 6).,
DUTY CYCLE
Correct
ALWAYS hold saw by motor body and
assisthandle (see Fig°7),
30minutes on 10 minutesoff dutycyclerefersto short-time operation°Shorttimeoperationdenotesoperationundernormalloadfor aspecifiedperiodandmaterial,startingcoid,theintervalbetweeneachperiodofoperation beingsufficienttoallowthetoo! tocooldownapproximatelytoroom temperature_
12