PROBLEM
An unusually
large amount
of sparks
Alot of wear
in sections
Blades are
breaking
Posslbta causes
of broken teeth
CAUSE
1,Damagedteeth
2.Feed speedistoosiow
3.Bluntlee[h
1.Feedspeed is toofast
2,Damaged teeth
3.Blunt teeth
4.Not cuttingperpendicular
toworksurface
1_Damaged teeth
2. Feed speed is too fast
3.,Blunt teeth
4. B_ades have buckled
5. Blades have burned out
t. Feed speed istoo fast
2. The surface being
cutis too hard
3,The teeth have been
damaged by impact
4. Blades were not
installedproperly
5, Blades are burned out
6. Notcutting perpendicular
towod_surface
SOLUTION
1.,Replacebtades
2oIncrease feed speed
3. Replace blades
1 Reduce feed speed
2. Replace blades
3oReplace blades
4oHold saw perpendicular
towork surface
1oReplace blades
2. Reduce feed speed
3.Replace blades
4oReplace blades
5.Replace blades
1.Reduce feed speed
2,Replace b_ades
3,Replace blades
4.Replace blades and follow
the properblade tnstalEation
instructions
5,Replace blades
6,Replace blades and always
holdsaw perpendicular to
work surface when cutting
Z_WARNING: This Twin Cutter saw uses specially designed 61fs-in, blades
and no other types of blades should ever be used, Other blades will not operate
safely in this saw and could result in serious personal injury
The following accessories for your TwinCutter saw are available at your local
Sears store,.
9-61t31 MA packaged set of 2 UniversalTwin Cutter Saw Blades
9 26678 _6 PackagedWa× Lubricating Sticks
IZ_ WARNING: The use of attachments or accessories that are not
!recommendedmightbedangerous
21
!I
1
|
t