REMOVING BLADES FROM SAW cont, (See Figs, 12- 15)
Fig. 13
Fig, 14
!
Fig. 15
ATTACHING REPLACEMENT BLADES TOTHE SAW (See Figs. 16 -19)
i ii i i

1_ WARNING: This TwinCutter saw uses specially designed 61/a-in. blades

and no other types or sizes of blades shouldever be used, Other types and sizes
i of blades wlll not operate safely in this sawand could result inserious personal
I iojury.

Seethe accessories section of this manualfor the proper replacementblades

that are neededfor this saw.

1.Unplug the sawn

2. Lay the saw down with the blade arbor pointing upward.
3oPlace blade "A" onto the blade flange with the "A" clearly visible (see Fig. 16).
4.Align the holes on the blade withthe pins on the flange and securely fit the blade
on the flange (see Fig. 17)o
5. Place blade "B" onto the arbor with the "B" easily visible, then thread lock nut
onto shaft, DO NOT tighten, (see FigĀ° 18)o
6.Turn the blades so that the holes in bothblades are lined up.
18
|!