BevelCutAcuttingoperationmadewithanangledtable.
Crosscut
A cuttingoperation made across the grain orthe width
of the workpiece.
Compound Cut
A compound cutis acut made using a miterangle
and a bevel angle at the same time.
FPM
"Feetper minute. Used inreference to surface speed
of blade.
Freehand (for band saw)
Performing a cut without the workpiece propedy
supported on the table.
Gum
A sticky, sap based residue from wood products.
Kerf
The matedal removed by the blade in a through cutor
the slot produced bythe blade in a nonthroughor
partial cut.
Leading End
The endof theworkpiece pushed intothe cutting tool
first.
Miter Cut
Acutting operation made with the edge of the
workpiece at any angle to the blade otherthan 90
degrees.
Push Stick
A device used tofeed the workpiece through the saw
blade during narrowcutting operations. It helps keep
the operator's hands well away from the blade.
Resaw
A cuffing operation to reduce thethickness ofthe
workpiece to make thinner pieces.
Resin
A sticky, sap base substance.
Ripping
A cuttingoperation along the length of the workpiece.
Saw Blade Path
The area directly in line-- over, under, behind, or in
front of the blade. As itapplies tothe workpiece, that
area which will be, or has been, cut by the blade.
Sat
Thedistance that the tip ofthe saw bada tooth s bent
(orsat) outward from the face of the blade.
Throw-Back
Throwing ofa workpiece in a manner similarto a
kickback. Usually associated with acause other than
the kerf closing, such as a workpiece being dropped
into the blade, or being carelessly placed in contact
with the blade.
Through Sawing
Any cutting operation where the blade extends
completely through the workpiece.
Workpiece
The itemon which thecutting operation is being done.
The surfaces ofaworkpiece are commonly referred to
as faces, ends, and edges.
Worktable
The surface on which theworkpiece restswhile
performinga cuttingoperation.
Blade Width 1/8 in. to 3/8 in.
Blade Length 59-1/4 in.
Capacities:
Frame to Blade 9 in.
Under guide 3-1/2 in.
Table Size 11-1/2 in.x 11-1/2 in.
Table Tilt
Input
No Load Speed
Overall Dimensions
Net Weight
0" - 45"
120 V, 2.5 amp 60 Hz, AC only
3000 FPM
19-1/2 in.x 12-1/2 in. x28 in.
30 Ibs.
7