| OPERATION |
| On/Off Switch |
| Throttle Control |
| Handle |
| Connectors |
| Primer |
Starter Handle |
|
| Edger Wheel |
Front Handle | Edger Blade |
| |
| Choke Lever |
Cultivator |
|
Tines |
|
Figure 2
Read this operator’s manual and safety rules before operating your cultivator / edger. Compare the illustrations with your unit to familiarize yourself with the location of various controls and adjustments. See Figure 2.
Starter Handle
The starter handle is attached to an eyebolt in the front of the engine.
Throttle Control
The throttle control is located on the upper handle. Squeezing the control against handle speeds up the engine and engages the cultivator / edger tines. Release the handle to stop the tines.
Choke Lever
The choke lever is located on the left side of engine and it is used to enrich the fuel mixture when starting a cold engine.
A |
|
| B |
|
|
| C |
|
|
|
|
|
|
|
| ||||||
| Close |
|
| Partial |
| Open |
|
Primer Button
The primer button is located on the right side of engine and it is used in conjunction with the choke to enrich the fuel mixture in the carburetor when starting a cold engine.
On/Off Switch
The On/Off switch is located on the upper handle. The switch must be in the On (I) to start engine and
Off (O) to stop engine.
Handle Connectors
The handle connectors are on each side between lower and upper handle. They are used to lock the upper handle in a set position.
Front Handle
The front handle can be used when transporting the unit.
Tines
The tines are used to cultivate, furrow, and prepare your garden for seeding.
Wheel Support Bracket
The wheel support bracket is attached to the tailpiece bracket behind the cultivator / edger. It is used to adjust the wheels to a higher or lower resting position.
Edger Wheel and Blade
The edger wheel and blade are separate parts that do not come attached on the cultivator / edger. They are to be used instead of the cultivator tines for vertical edging.
Stopping Engine
•Push the On/Off switch to Off (O) position to stop engine and tines.
•Disconnect spark plug wire from spark plug and ground against the engine.
6