Craftsman 316.794801 manual Elbow Tube, Throttle Cables, Throttle Grip Cruise Control

ThecompletedblowertubeshouldlooklikeFigure6.

Elbow Tube

Hose Clamp

Flex Tube

Throttle Cables _J

Secure the Throttle Cables

Place a zip tie around the elbow tube and the throttle cables (Fig. 7) as shown, making sure not to crimp the cables.

Zip Tie

-_ Hose Clamp

Upper Blower Tube

__ On/Off Switch

Throttle Grip Cruise Control

First Lower

Blower Tube _-_

Zip Tie

Fig. 7

Adjusting the Throttle Grip

1.Move the throttle grip to a location on the upper blower tube that is comfortable for you (Fig. 8).

Throttle Grip

Upper Blower Tube

A

Fig. 8

2. Using a Torx T-20 Torx screwdriver, tighten the two screws at

Second Lowerthe bottom of the throttle grip (Fig. 9). Blower Tube

Nozzle

Fig. 6

Fig. 9

sure that the blower tubes are locked in place or firmly ] WARNING: To avoid serious personal injury, make installed.