Craftsman 320. 28180 Using the Router with the Router Table, Routing Operation

USING THE ROUTER WITH THE ROUTER TABLE

1.Read the and understand entire Product Manual for the router,

2.Always plug the router into the switched outlet in the router table° Never plug

a router-table-mounted router into another power source.

3.Make sure the router-table switch is off. Lock-on the router switch.

4.Plug the router-table cord into a power source°

5_ Turn on the power to the router table by pulling out the ON/OFF switch.

6.Always control the power to the router with the router-table switch whenever the router is mounted on the table.

ROUTING OPERATION

1.Read the and understand entire Product Manual for the router.

2.Adjust the fence to support the work piece to be cut.

NOTE: The work piece must always be held tight against the fence.

3.Reconfirm that all router adjustments are securely locked before supplying power to the router,

4.Feed the work piece from right to left.

WARNING" The direction of feed for the work piece is always against the sharp edges of the cutter and into the rotation of the cutter. Failure to follow this rule can result in serious personal injury.

28180 Manual_Revised_07-0228 Page21