Your router table has a precision-built electric switch box and it should be con- nected to only a 120-volt, 60-HZ AC power supply (normal household current), DO NOT operate on direct current (DC). The large voltage drop would cause a loss of power and the motor would overheat. If the router table does not oper- ate when plugged into correct 120-volt, 60-HZ AC ONLY outlet, check the power supply° The router table comes with an 8-ft. power cord (no adapter needed).
This Router Table has the following features:
50utfeed fence | 10, Dust Collection and Guard | pter |
11 Above-the-table | | 3 Extended fence |
1 Router table
2Integrated safety switch
8 Fastening
Back of the Switch
1, Oversized table (14-1/8" x 23-5/8") for a large, smooth, durable, work sur- face and improved sound absorption. Table height clearance is 11-1/4 in. to accommodate most fixed and plunge-based routers
2_ Integrated safety switch with two outlets, Single-socket capacity is t 5 Amps, total capacity is 20 Amps.
3.Extended fence provides maximum work piece support; the fence can be moved forward and backward 3-3/4 inch.
4.Infeed and outfeed fence can each be extended 2 in_
5.Outfeed fence can be adjusted as much as 9/16-in. forward of the infeed fence for joining operations.
&Vacuum adapter fits a 2-1/2 inch shop vacuum hose,,
7.Miter-gauge adjusts from 0° to 60 ° in both directions for increased stability in many difficult feed situations.
8.Fastening holes (11/32-inch dia.) allow the Router Table to be fixed to a stable work surface.
