oUse only
oRepair or replace a damaged or worn cord immediately. Repair or replace damaged or worn cord immediately.
This tool is intended for use on a circuit that has an outlet that looks like the one illustrated in Sketch A in the figure below. The tool has a grounding plug that looks like the plug illustrated in sketch A in the figure below. A temporary adapter, which looks like the adapter illustrated in Sketches B and C, may be used to connect this plug to a
receptacle as shown in Sketch |
|
|
|
| ||||
B if a properly grounded outlet |
|
|
|
| ||||
is not available. The tempo- |
| flil_ |
|
| ||||
rary adapter should be used |
|
| Screw |
| ||||
only until a properly grounded |
|
|
| |||||
|
|
|
| |||||
outlet can | be | installed | by |
| \ | Metal |
| |
a qualified | electrician. | The |
| ",, | / | |||
| Grounding Pin | |||||||
rigid | ear, lug, |
| ||||||
|
| |||||||
and the like, extending from |
|
| Cover of Grounded | |||||
|
| Outlet Box | ||||||
the adapter must be connect- |
|
| ||||||
|
|
|
| |||||
ed to a permanent | ground, | (_ | GrOolndieg Means |
|
| |||
such as a properly grounded |
|
|
|
| ||||
outlet box. |
|
|
|
|
|
|
|
|
Double-insulated tools
The
Carefully read and understand all instructions for the
•Replacement parts: When servicing use only identical replacement parts.
Polarized plugs: To reduce the risk of electric shock, this equipment has a po- larized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet, Do not change the plug in any way,
Use the proper extension cord,
•Make sure that your extension cord is in good condition
•When using an extension cord, be sure to use one heavy enough to carry the current your product will draw, An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
28180 Manual Revised_0743228 | Page 6 |
