_" CHECKLIST
Before you operate your new snow thrower, to ensure that you receive the
best performance and satisfaction from this quality product, please review the following checklist:
_' All assembly instructions have been completed.
_' The discharge chute rotates freely. _' No remaining loose parts in carton.
_' Check the fasteners. Make sure all fasteners are tight.
_' Check the air pressure of the tires.
Correct air pressure is from 14 to 17 PSI. See the side of the tire for maxi-
mum inflation. Do not exceed maxi- mum inflation.
v' On electric start models, the unit was
shipped with the starter cord plugged into the engine. Before operating, un- plug the starter cord from the engine.
While learning how to use your snow thrower, pay extra attention to the fol- lowing important items:
v' Engine oil is at proper level. Use a
high quality detergent oil classified "For Service SG, SH, SJ, SL, or higher".
_' Make sure gas tank is filled properly
with clean, fresh, unleaded gasoline with a minimum of 85 octane.
_' Become familiar with all controls- their location and function. Operate controls before starting engine.
F 0410108L | 10 |
