9.Movethrottlelever(A)to"Fast"position,shownasa
rabbit.
10. Move choke lever (B) to "Closed" position.
12.When starting engine, position yourself as recommended and grasp starter grip handleand pull slowly until you feel some resistance.Then pull rapidly to start engine.
CLOSED
NOTE:For a warm engine, be sure the choke lever is in the "Open" position.
11. Move engine switch (6) to "On" position.
OFF
ON
IMPORTANT:Before starting the pressure washer, be sure /ou are wearing adequatesafety goggles.
| WARHIHG |
,_ | Risk of eye injury. |
_Spray | can splash back or propel objects. |
Alwayswearsafetygoggleswhenusingthis equipmentor in vicinityof whereequipmentis in use.
Beforestartingthe pressurewasher,besureyou arewearing adequatesafetygoggles. NEVERsubstitutesafetyglassesfor safetygoggles.
WARHIHG
Starter cord kickback (rapid retraction) can result
in bodily injury. Kickbackwill pull handand arm _,_.< toward enginefaster than you can let go.
Broken bones, fractures, bruises, or sprains could result.
*NEVERpullstartercord withoutfirst relievingspraygun pressure.
*Whenstartingengine,pullcord slowlyuntil resistanceis felt andthen pullrapidlyto avoidkickback.
*Aftereachstartingattempt,whereenginefailsto run, always pointspraygunin safedirection,pressredbuttonandsqueeze sprayguntriggerto releasehighpressure.
*Firmlygraspspraygunwith both handswhenusing high pressuresprayto avoidinjury whenspraygunkicksback.
13.Return recoil starter slowly. DO NOTlet rope "snap back" against starter.
14.When engine starts, slowly movechoke lever to "Open" position as engine warms. If engine falters, movechoke
lever to "Closed" position, then to "Open" position.
15.If enginefires, but does not continue to run,always point gun in safe direction, press red botton and squeezespray gun trigger to releasehigh pressure. Move choke lever to "Open" position, and repeatsteps 12 through 14.
16.If enginefails to start after six pulls, movechoke lever to "Open" position, and repeatsteps 12through 14.
NOTE:Always keepthe throttle lever in the "Fast" position when operating the pressure washer.
10
