Craftsman 580.7523 manual After Eachuse, Fire or explosion can cause severeburns or

AFTER EACHUSE

Water should not remain in the unit for long periods of time. Sediments or minerals can deposit on pump parts and "freeze" pump action. Followthese procedures after every

use:

1.Shut off engine, turn off water supply, point gun in a safe direction, press red button and squeezetrigger to relieve trapped pressure and let engine cool.

WARHJHG

The high pressure stream of water that this equipment produces can cut through skin and its

)ossible amputation.

_ nderlying tissues, leadingto serious injury and Spray gun traps high water pressure, even when

engine is stopped and water is disconnected, which can cause injury.

. Keephighpressurehoseconnectedto pumpandspraygun whilesystemis pressurized.

. ALWAYSpointspraygunin safedirection,pressredbutton andsqueezesprayguntriggerto releasehighpressure,every time youstopengine.

2.Disconnect hose from spray gun and high pressure outlet on pump. Drain water from hose, gun, and spray tip extension. Usea rag to wipe off the hose.

3.Empty pump of all pumped liquids by pulling recoil handleabout 6 times. This should remove most liquid in pump.

4.Coil high pressure hose on hook provided on handle.

5.Store unit in a clean, dry area.

6.If storing for more than 30 days see Long Term Storage on next page.

WARHJHG

_	uel and its vapors are extremely flammable and
	explosive.
	death.
	Fire or explosion can cause severeburns or

WHENSTORINGFUELOREQUIPMENTWITH FUELIN TANK

. Storeawayfromfurnaces,stoves,waterheaters,clothes dryers,or otherappliancesthathavepilot light or otherignition sourcebecausetheycanignitefuelvapors.

2O