Craftsman 580.7523 manual Spray, When Adjusting or Making Repairs to Your Pressure Washer

Models: 580.7523

1 60
Download 60 pages 46.56 Kb
Page 4
Image 4

WARHIHG

The high pressure stream of water that this equipment produces can cut through skin and its

)ossible amputation.

_ nderlying tissues, leading to serious injury and Spray gun traps high water pressure, even when

engine is stopped and water is disconnected, which can cause injury.

DO NOT allow CHILDRENto operate pressure washer.

NEVERrepair high pressure hose. Replaceit.

NEVERrepair leaking connections with sealant of any kind. Replace o-ring or seal.

NEVERconnect high pressure hoseto nozzleextension. Keep high pressure hose connected to pump and spray gun while system is pressurized.

ALWAYS point spray gun in safe direction, press red button and squeezespray gun trigger to releasehigh pressure, every time you stop engine.

NEVERaim spray gun at people, animals, or plants. DO NOTsecure spray gun in open position.

DO NOT leavespray gun unattendedwhile machine is running.

NEVERuse a spray gun which does not havea trigger lock or trigger guard in place and in working order.

Always be certain spray gun, spray tips and accessories are correctly attached.

WARHIHG

Use of pressure washer can create puddles and slippery surfaces.

Kickback from spray gun can cause you to fall.

Operate pressure washer from a stable surface.

The cleaning area should haveadequate slopes and drainageto reduce the possibility of a fall due to slippery surfaces.

Be extremely careful if you must use the pressure washer from a ladder, scaffolding, or any other similar location.

Firmly grasp spray gun with both hands when using high pressure spray to avoid injury when spray gun kicks back.

WARHIHG

Unintentional sparking can result in fire or

electric shock.

WHEN ADJUSTING OR MAKING REPAIRS TO YOUR

PRESSURE WASHER

Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.

WHENTESTINGFORENGINESPARK

Use approved spark plug tester.

DO NOT check for spark with spark plug removed.

WARHIHG

Starterhands, andhair, otherclothing,rotatingor accessoriesparts can .entangle

*NEVERoperate pressure washer without protective housing or covers.

. DO NOT wear loose clothing, jewelry or anything that may be caught in the starter or other rotating parts.

Tie up long hair and remove jewelry.

WARNING

Risk of eye injury.

_Spray

can splash back or propel objects.

Always wear safety goggles when using this equipment or in vicinity of where equipment is in use.

Before starting the pressure washer, be sure you are wearing adequate safety goggles.

NEVERsubstitute safety glasses for safety goggles.

NOTICE

High pressure spray may damage fragile items including lass.

DO NOT point spray gun at glass when using red (0°) spray tip. NEVERaim spray gun at plants.

NOTICE

Improper treatment of pressure washer can damage it and shorten its life.

If you have questions about intended use, ask dealer or contact Sears.

NEVERoperate units with broken or missing parts, or without protective housing or covers.

DO NOT by-pass any safety device on this machine. DO NOT tamper with governed speed.

DO NOT operate pressure washer above rated pressure. DO NOT modify pressure washer in any way.

Before starting pressure washer in cold weather, check all parts of the equipment to be sure ice has not formed there.

NEVERmove machine by pulling on hoses. Use handle provided on unit.

Check fuel system for leaks or signs of deterioration, such as chafed or spongy hose, loose or missing clamps, or damaged

tank or cap. Correct all defects before operating pressure washer.

This equipment is designed to be used with Sears authorized parts ONLY. If equipment is used with parts that DO NOT comply with minimum specifications, user assumes all risks and liabilities.

Page 4
Image 4
Craftsman 580.7523 manual Spray, When Adjusting or Making Repairs to Your Pressure Washer