Craftsman 580.7523 manual Howto Useyour Pressurewasher, Pressure Washer Location

HOWTO USEYOUR PRESSUREWASHER

If you haveany problems operating your pressure washer, please call the pressure washer helpline at 1-800-222-3136.

Pressure Washer Location

PressureWasherClearance

WARNING

_	Exhaustheat/gases can ignitecombustibles,
	structures or damage fuel tank causing a fire.

•Keepat least5ft. (152cm)clearanceonall sidesof pressure washerincludingoverhead.

Placepressure washer outdoors in an areathat will not accumulate deadly exhaust gas. DO NOTplace pressure washer where exhaust gas (A) could accumulateand enter inside or be drawn into a potentially occupied building. Ensureexhaust gas is kept awayfrom any windows, doors, ventilation intakes, or other openings that can allow exhaust gas to collect in a confined area. Prevailingwinds and air currents should be taken into consideration when positioning _ressurewasher.

WARHIHG

Running engine gives off carbon monoxide, an

Breathingcarbon monoxide can causeheadache,

_ dorless, colorless, poison gas.

fatigue, dizziness, vomiting, confusion, seizures, nausea,fainting or death.

. OperatepressurewasherONLYoutdoors.

•Keepexhaustgasfromenteringaconfinedareathrough windows,doors,ventilationintakes,or otheropenings.

•DONOTstart or runengineindoorsor in anenclosedarea, evenif windowsanddoorsareopen.

mJ

To Start Your Pressure Washer

To start your engine-powered pressure washer for the first time, follow these instructions step-by-step. This starting information also applies wheneveryou start the engine after you have let the pressure washer sit idle for at least a day.

1.Placepressurewashernearan outsidewater source capableof supplyingwater at a flow rate greaterthan

5.0 gallons per minuteand no lessthan 20 PSIat pressure washerend of gardenhose.

2.Checkthat high pressure hose is tightly connected to spray gun and pump. See Assemblyfor illustrations.

3.Makesure unit is in a level position.

4.Connect garden hose to water inlet on pressure washer pump.

[		NOTICE
run	pump	water supply	connected
IDO NOT	the	without the
and turned on.

L instructionwillamageto equipmentresultingfromvoid warranty. failureto followthis

5.Turn ONthe water, press red button on the gun and squeezethe trigger to purge the pump system of air and impurities.

6.Attach nozzleextension to spray gun. Tighten by hand.

Choosespray tip you want to use, pull back on collar of nozzleextension, insert spray tip and releasecollar. Tug on spray tip to makesure it is securely in place. See How to Use Spray Tips.

8.Movefuel valve lever (B) to "On" position.

OFF