Craftsman 580.7523 manual TyNOTICE, Ch3nge Engine Oil, Oil Cylinder Bore, Protect Pump

Ch3nge Engine Oil

While engine is still warm, drain oil from crankcase. Refill with recommended grade. See Changing Engine Off.

Oil Cylinder Bore

*Removespark plug. Squirt about 1 tablespoon of clean engine oil into the cylinder. Coverspark plug hole with rag. Pull recoil handleslowly to distribute oil. Avoid spray from spark plug hole.

*installspark plug. DO NOTconnect spark plug wire.

Protect Pump

To protect the pump from damage caused by mineral deposits or freezing, use PumpSaver, Mode] 6039, to treat pump. This prevents freezedamage and lubricates pistons and seals.

tyNOTICE

ou must protect your unit from freezing temperatures. Failureto do so will permanentlydamageyour pumpand renderyour unit inoperable.

Freezedamageis not coveredunderwarranty.

NOTE:PumpSaveris available as an optional accessory. It is not included with the pressurewasher. Contact your local Searsservice center to purchase PumpSaver.

To use PumpSaver, makesure the pressurewasher is turned off and disconnected from supply water. Readand follow all instructions and warnings given on the PumpSavercontainer.

Other Storage Tips

1.DO NOTstore fuel from one seasonto another unless it has beentreated as described in Protect Fuel System.

2.Replacefuel container if it starts to rust. Rust and/or dirt in fuel can cause problems if it'sused with this unit.

Coverunit with a suitable protective cover that does not retain moisture.

WARHJHG

_ Storagecovers can be flammable.

*DONOTplacea storagecoveroverahot pressurewasher.

*Letequipmentcoolfor a sufficienttime beforeplacingthe coveronthe equipment.

4.Store unit in a clean and dry area.

22