ASSEMBLY
Unpacking
1.Remove unit from carton and discard all packaging.
INSTALLATION
HOW TO SET UP YOUR UNIT
Location of the Air Compressor
•Locate the air compressor in a clean, dry and well ventilated area.
2.Make sure the outlet being used has the same configuration as the grounded plug. DO NOT USE AN ADAPTER. See illustra-
• | The air compressor should be | tion. |
| located at least 12" away from |
|
| the wall or other obstructions | Plug |
| that will interfere with the flow of |
|
| air. | Grounded |
• | The air compressor pump and | Outlets |
| shroud are designed to allow for |
|
| proper cooling. The ventilation |
|
| openings on the compressor are | Grounding Pin |
| necessary to maintain proper |
|
| operating temperature. Do not | 3. Inspect the plug and cord before |
| place rags or other containers on | |
| or near these openings. | each use. Do not use if there are |
|
| signs of damage. |
GROUNDING INSTRUCTIONS
Risk of Electrical Shock. In the
event of a short circuit, grounding reduces the risk of shock by pro- viding an escape wire for the elec- tric current. This air compressor must be properly grounded.
The portable air compressor is equipped with a cord having a grounding wire with an appropriate grounding plug (see following illustra- tions).
1.The cord set and plug with this unit contains a grounding pin. This plug MUST be used with a grounded outlet.
IMPORTANT: The outlet being used must be installed and grounded in accordance with all local codes and ordinances.
4.If these grounding instructions are not completely understood, or if in doubt as to whether the compressor is properly ground- ed, have the installation checked by a qualified electrician.
Risk of Electrical
Shock. IMPROPER
GROUNDING CAN RESULT IN ELECTRICAL SHOCK.
Do not modify the plug provided. If it does not fit the available outlet, a correct outlet should be installed by a qualified electrician.
Repairs to the cord set or plug MUST be made by a qualified elec- trician.
A10819 | 10- ENG |
