Manuals / Craftsman / Household Appliance / Siding

Craftsman CTS205 manual 111, First course

Models: CTS205

1 149
Download 149 pages 55.18 Kb
Page 112
Image 112

illustration 1a

illustration 1b

1/4"

2-5/8"

PRO TIP: When installing Cedar Impressions over foam insulation, extra care needs to be taken to verify that adequate space is left between all nail heads and the panel.

1/4"

always secure first using center pin hole

CertainTeed Vinyl Siding Installation Guide

NOTE: Cedar Impressions Half Round Shingles are installed from left to right.

First course

Strike a level line around the house and install Cedar Impressions Metal Starter (see illustration 1a). An alternative method of starting Half-Rounds is to use J-channel in place of starter strip, to receive the bottom edge of the panel (see illustration 1b). To use this method, the rounded portion of the panel must be removed below the locking leg to create a continuous straight edge.

NOTE: When using a J-channel as a starter, leave 1/4" between the siding panel and pocket.

Remove 2-5/8" from the left side of the upper panel course, leaving a 90° left side edge.

Starting on the left side of the wall, hook the bottom edge of the panel into the starter strip and slide the panel into the cornerpost or receiving channel. Leave 1/4" space between the panel and the inside wall of the cornerpost for expansion.

Fasten the panel to the wall by first nailing through the round center hole of the nailing hem at the top of the panel. Then fasten the rest of the panel by nailing through the centers of the remaining nail slots a maximum of every 8" to 16" on center. Provide 1/8"

to 1/16" between the nail head and the panel to allow freedom of movement during normal expansion and contraction. Failure to provide this space between the nail head and the panel will cause the panel to buckle. Do not put a nail into the far right slot until the overlapping panel is positioned for installation.

Install the next panel by using a dual motion of hooking into the starter strip and sliding over the previous panel. This will ensure a proper lap.

Position the overlapping panel so that there is 1/8" to 1/4" between the panels, depending on the panel temperature at time of installation. The spacing may appear larger or smaller than the spaces between the shingles on the panel. This is normal and necessary in order to allow for expansion and contraction.

Nail in the center of the far left slot of the overlapping panel.

Continue to install the remaining panels of the first course as described above.

When a window or doorway breaks a course, continue the application as if the opening were not there.

111

Page 111 Page 113
Page 112
Image 112
Craftsman CTS205 manual 111, First course
Page 111 Page 113

CTS205 specifications

The Craftsman CTS205 is a versatile and reliable power tool designed for both professionals and DIY enthusiasts. Known for its robust performance and innovative features, this tool has become a popular choice among users seeking efficiency and durability.

One of the standout characteristics of the CTS205 is its powerful motor, which delivers ample torque for a variety of tasks. With a maximum output of 20 volts, the motor ensures that users can tackle demanding projects with ease, whether it's drilling through tough materials or driving screws into dense surfaces. The tool's battery technology is also noteworthy; the CTS205 is equipped with lithium-ion batteries that offer extended run times and quicker charging capabilities. This means less downtime and more productivity, allowing users to complete their tasks without unnecessary interruptions.

Ergonomics play a crucial role in the design of the CTS205. It features a comfortable grip that reduces fatigue during extended use, making it ideal for intricate work. The balanced weight distribution ensures that users can maneuver the tool effortlessly, which is especially beneficial when working in tight spaces or at awkward angles.

In terms of versatility, the CTS205 comes with multiple speed settings, allowing users to adjust the tool's performance to suit various applications. The variable speed feature enables precise control, making it easier to achieve the desired results regardless of the material or task at hand. Coupled with an adjustable clutch, this tool provides the flexibility needed for light to heavy-duty work.

Additionally, the CTS205 includes advanced safety features that enhance the user's experience. A built-in LED light illuminates the work area, ensuring visibility in low-light conditions. This is particularly useful for tasks in poorly lit spaces, where precision is key. The tool also incorporates a safety lock mechanism that prevents accidental starts, adding an extra layer of security.

Overall, the Craftsman CTS205 embodies a perfect blend of power, comfort, and functionality. Its impressive features, including the high-performance motor, ergonomic design, and user-friendly technologies, make it an excellent investment for anyone looking to elevate their craftsmanship. Whether it's for home improvement projects or professional applications, this tool stands out as a reliable companion capable of handling a diverse range of tasks with ease.