Craftsman CTS205 manual Creating End Caps for 5 Lineals

CertainTeed Vinyl Siding Installation Guide

			Creating End Caps for 5" Lineals
remove		remove	To create the header, first cut a 7" piece of 5" lineal. Measure and
	3/4"		trim as shown.

The resulting piece fits into the end of the 5" lineal.

2"

The ends of the 5" lineal also need trimming to receive the end caps. Create a 3/4" rain tab in the pocket area and trim off a 3/4" tab from the bottom.

remove

3/4"

raintab

3/4"

NOTE: To make end caps for 3-1/2" lineals, simply start with a 5-1/2" piece and remove the 3/4" and 2" areas as shown for the 5" end caps.

56