Allow for 1/3 of

expansion

1A

1B

Allow for 2/3 of

CertainTeed Vinyl Siding Installation Guide

Wall Panels

Follow the instructions described earlier under the section “Preparation for Horizontal Siding” beginning on page 28.

Plan the panel layout

Correctly installed vertical siding should have a balanced appearance. This means that if you were to draw a vertical line down the center point of a wall, you’d have an equal number of panels to the right and left. If you had to trim panels to fit, the end-most panels would be of identical width.

To create this pleasing appearance, divide the space to be covered by a partial panel over both ends of a wall. For example, if a wall required 25 full panels plus 10", you would rip cut two 5" lengths of panel to create the end pieces.

Expansion and contraction

In a vertical siding installation, most of the expansion is downward. So instead of allowing equal space for expansion at both ends of a vertical panel, leave more space at the lower end: allow for 1/3 of the total expansion at the top of a panel and 2/3 of the total expansion at the bottom.

For example, if the total expansion equals 3/4" (3/8" + 3/8"), allow 1/4" at the top and 1/2" at the bottom. If the total expansion equals 1/2" (1/4" + 1/4"), allow 3/16" at the top and 5/16" at

the bottom.

NOTE: Always position top most nail at the top of the top most full nail slot (1a). Center the remaining nails in the slots (1b). When installing siding or accessories vertically, make sure the bottom of the panel can expand downward

furring

expansion

cornerpost

undersill

trim

snap locks

without interference.

Cut the first of the partial panels (if partial panels are necessary). Mark the cut line by measuring from the nail hem edge. Rip cut the panel. Do not cut off the nail hem. Use a snap lock punch to create locking tabs along the cut edge. Space the tabs 6" apart.

Before installing this partial panel into the outside cornerpost, provide additional support at the cut edge to compensate for the locking channel that was trimmed off.

To do this, insert furring into the channel of the outside cornerpost and nail it to the substrate. After furring, insert a length of undersill trim into the cornerpost and nail it to the furring. Finally, slide the cut edge of the panel into the undersill trim, making sure to engage the snap locks (see illustration).

panel

Using a level, make certain this panel is plumb. Nail every 12". Follow the same nailing procedures described for horizontal siding.

83

Page 84
Image 84
Craftsman CTS205 manual Wall Panels, Plan the panel layout, Expansion and contraction

CTS205 specifications

The Craftsman CTS205 is a versatile and reliable power tool designed for both professionals and DIY enthusiasts. Known for its robust performance and innovative features, this tool has become a popular choice among users seeking efficiency and durability.

One of the standout characteristics of the CTS205 is its powerful motor, which delivers ample torque for a variety of tasks. With a maximum output of 20 volts, the motor ensures that users can tackle demanding projects with ease, whether it's drilling through tough materials or driving screws into dense surfaces. The tool's battery technology is also noteworthy; the CTS205 is equipped with lithium-ion batteries that offer extended run times and quicker charging capabilities. This means less downtime and more productivity, allowing users to complete their tasks without unnecessary interruptions.

Ergonomics play a crucial role in the design of the CTS205. It features a comfortable grip that reduces fatigue during extended use, making it ideal for intricate work. The balanced weight distribution ensures that users can maneuver the tool effortlessly, which is especially beneficial when working in tight spaces or at awkward angles.

In terms of versatility, the CTS205 comes with multiple speed settings, allowing users to adjust the tool's performance to suit various applications. The variable speed feature enables precise control, making it easier to achieve the desired results regardless of the material or task at hand. Coupled with an adjustable clutch, this tool provides the flexibility needed for light to heavy-duty work.

Additionally, the CTS205 includes advanced safety features that enhance the user's experience. A built-in LED light illuminates the work area, ensuring visibility in low-light conditions. This is particularly useful for tasks in poorly lit spaces, where precision is key. The tool also incorporates a safety lock mechanism that prevents accidental starts, adding an extra layer of security.

Overall, the Craftsman CTS205 embodies a perfect blend of power, comfort, and functionality. Its impressive features, including the high-performance motor, ergonomic design, and user-friendly technologies, make it an excellent investment for anyone looking to elevate their craftsmanship. Whether it's for home improvement projects or professional applications, this tool stands out as a reliable companion capable of handling a diverse range of tasks with ease.