Creative Labs 500DAB AUTOTUNE, Quick scan, To do a quick scan

• When a station is unavailable or no signal is present, one of the messages similar to Figure 3-5 appears.

Figure 3-5

Quick scan

To do a quick scan

Press the AUTOTUNE button to begin automatic scanning of available ensembles in your country or region. This may take a few seconds, during which you will see the displays in the sequence below. When a station is detected, it plays immediately.

Figure 3-6

When a station is not available or its signal is not present, one of the messages similar to Figure 3-5 appears.

3-3 Using Your SoundWorks 500DAB

Contents

Safety & Regulatory Information IMPORTANT SAFETY INSTRUCTIONS Contents Your DAB/FM Radio Glossary Setting Up Your DAB/FM Radio General Specifications Introduction Package Contents Your DAB/FM Radio Page Setting Up Your DAB/FM Radio Using Your SoundWorks 500DAB DAB Mode Selecting DAB mode Scanning stations in DAB mode Quick scan To do a quick scan Manual (MAN) scan To manually scan in an ensemble MAN Tuning to stations Viewing additional information (INFO display) FM Mode Selecting FM mode Adjusting the FM tuning step Scanning stations in FM mode Selecting audio mode (Auto or Mono) Using Basic Functions Setting the sleep timer Checking the sleep timer setting Setting the alarm BEEP RADIO To activate the alarm To deactivate the alarm OFF To stop the alarm after it rings To turn on the Snooze function Resetting the radio Using the AUX IN jack Glossary Band III Frequencies Table 1: List of DAB Band III Frequencies General Specifications